Industrial and municipal pumps, systems and repair Pumps. Systems. Everything in Between.
Need a pump? We source and supply hundreds of models. Need a complete engineered system? We build those too.
Every Pump Audit comes with a Rhino hat.
Service and repair
Every operation has that one pump.
We repair pumps from all manufacturers, in our shop or on your site. One team for the first call and every one after.

What we do
One team for the whole system.
RhinoStak
Custom pump packages, engineered, assembled and tested as one unit.

Kontrols
Pump panels, VFDs and SCADA from our UL 508A listed panel shop.
OverWatch
In-line wastewater pumping with a clean, dry vault instead of a wet well.

Industries
Built for the work you do.
Proven at Utah FORGE
Four Levare HPS units at 379°F and 3,500 PSI.
Utah FORGE is the Department of Energy's enhanced geothermal field lab near Milford, Utah. Rhino Pumps supplied, installed and commissioned the four Levare HPS units that provide its high pressure injection.
Why Rhino
Anyone can supply a pump.
Pump systems that last take careful design, a clean install and support that shows up after startup. We handle all of it.
- 240 years of combined industry experience
- 13 years delivering engineered pump systems
- 6 locations across the West
-
Our own shops
Engineering, a fab shop, blasting and painting, and a UL 508A listed panel shop.
-
The right pump
The right pump from the right manufacturer, matched to how your system actually runs.
-
Close to the job
Branches in Utah, Arizona, Idaho, Washington, Colorado and Nevada.
-
Veteran owned
Based in Pleasant Grove, Utah, with repairs, parts and field service long after startup.
What does Rhino Pumps do?
Rhino Pumps repairs and services pumps from all manufacturers, supplies the right pump from the right manufacturer, and engineers complete pump packages, controls and wastewater systems. We work with municipal, industrial, mining, agricultural and commercial customers from branches across the West.
What is a Pump Audit?
A Pump Audit is an on-site visit. We come out, check what could be going wrong with your pumps and give you a report of the findings. Every Pump Audit comes with a Rhino hat. Book a Pump Audit.
Do you repair pumps from other manufacturers?
Yes. We repair pumps from all manufacturers in our shop and in the field, with in-house machining, dynamic balancing, root cause analysis and performance testing, plus parts for any manufacturer. Every repair comes with an eight-document QA package.
What is RhinoStak?
RhinoStak is our line of custom engineered pump packages. Each one is engineered, assembled and tested as a complete unit in our shop before it ships, so it goes in faster and works the way it was designed to. Controls from our UL 508A listed panel shop can be added when the job calls for them.
What is OverWatch?
OverWatch is a direct in-line wastewater pumping system that lifts influent at the point of entry, so there is no wet well. The pumps run in pairs in a clean, dry vault crews can climb into, and self clearing impellers handle ragging.
Can OverWatch integrate with existing controls?
Yes. OverWatch can tie into your PLC and SCADA systems for monitoring, alarms and remote visibility alongside your existing control standards.
Which industries do you serve?
Mining, municipal water, wastewater, industrial, geothermal, construction, agriculture, HVAC, data centers, fire protection, snowmaking, golf courses and landscape irrigation. See pumps by industry.
What areas do you serve?
Our branches are in Pleasant Grove, Utah; Phoenix, Arizona; Caldwell, Idaho; Kirkland, Washington; Longmont, Colorado; and Elko, Nevada. RhinoStak packages ship nationwide.
How do I get a quote?
Call us or send the details through our contact form: the application, flow and head, what you're pumping and your timeline. If you're not sure what you need yet, start with a Pump Audit.
Have a pump you're tired of dealing with?
Book a Pump Audit. We come out, check what could be going wrong and give you a report of the findings. Every Pump Audit comes with a Rhino hat.
Pump Audits are offered in Utah, Arizona, Idaho, Washington, Colorado and Nevada. Other states case by case.


Mining ›
Municipal water ›
Wastewater ›
Industrial ›
Geothermal ›
Construction ›
Agriculture ›


